PCB

Mylar™

Mylar™

Arcalian  supply SDI's range of Mylar™ for exposure frames

• Smooth
• Embossed

PVA Sponge Roller Covers

PVA Sponge Roller Covers

PVA Sponge Roller Covers are highly water absorbent. Custom made to fit virtually any wet process line where excess water is undesirable.

Suitable for Höllmüller, Schmidt, I.S, Pola e Massa etc.

Artwork and Board Cleaning

Contamination Analysis Rollers

The hand roller is smoothly applied to any flat surface, removing any loose, dry contamination. The roller is then cleaned on the Adhesive Pad which traps the contamination, leaving the roller clean for the next surface.

Use High Tack rollers for rigid substrates such as laminate, or boards at soldermask. Use Medium and Low Tack for phototools and inner layers, or our special Thin Film polymer for polyimide or dry-film laminated panels prior to exposure

Use a Silicone-Free roller and pad, where coating or laminating, to ensure adhesion. Don't forget to examine the pad to understand the sources of your contaminants.

Adhesive Rolls

Arcalian supply specially engineered to allow transfer of contamination in one direction only and can be manufactured in virtually any size to fit any Contact Cleaner, including those of our competitors.

We supply both Continuous and Pre-Cut Adhesive Rolls.

Replacement Polymer Rollers for Contact Clean Machines

Arcalian can upgrade Polymer Rollers in any Contact Cleaner, and can advise on the perfect formulation and surface characteristics for any substrate.

With the right information, we can quote replacement rollers (either individually or in sets), either to replicate the originals, enhance cleaning abilities, or transform the Contact Cleaner to Silicone-Free operation.

IPA Wipes for Polymer Roller maintenance

High quality, lint-free IPA wipes for maintaining board cleaner polymer rollers in top condition. Sold in tubs of 200.

Dust Control

Disposable and Permanent Dust Control Flooring

Arcalian has a wide range of flooring solutions for keeping dust-critical areas free of foot and wheel-borne contamination.

Clean Room Rollers

The Floor and Wall Cleaning Rollers were designed specifically for cleaning the interior floors and walls of the Clean Room. An extended handle is easily added to the grip to allow ceilings to be easily cleaned also.

Mini-Tak Rollers

Mini-Tak is made of a unique adhesive coating that stops particles from becoming airborne during cleaning. The lightweight construction and simple handle causes less fatigue during the cleaning process and reduces costs by eliminating the need to close clean room or shut down production for maintenance. It is ideal to gently lift contaminants from small surfaces.

Sold in boxes of 12 rollers with one handle.

Hand and Glove Cleaner

The Hand and Glove Cleaner is here to cut your cost of glove replacement. This unit is designed to extend the life of disposable gloves and reusable gloves with as little inconvenience as possible. This allows usage from your gloves while maintaining a cleaner working environment.

IPA Wipes for Surfaces and Products

High quality, lint-free IPA wipes for cleaning hard surfaces. Leaves no residue, flashes off almost instantly.

 Sold in tubs of 200.

Anti-Static

DisCord Plus

Use DisCord Plus to remove static charge from dry-film resist as you laminate. Simply mount the elastic cord tautly across the dry-film (it doesn't need to touch) and ensure it is earthed at one end.

ArcRod

For even better static kill, the semi-rigid ArcRod can be mounted easily across the dry-film laminator.

Powered Anti-Static Bars

Arcalian supply a wide range of active (powered) anti-static bars for every application. We have traditional anti-static bars powered by a separate transformer (a transformer can control up to four bars), and "intelligent" bars that are self-contained, needing no external transformer.

We also supply ATEX bars for explosion-proof areas.

Drill Shop - Chek-Rite

Chek-Rite

Chek-Rite is a dimensionally stable translucent plastic sheet designed for visually checking drilled hole locations in the printed circuit boards

Allows easy identification of incorrect diameters, missed or extra holes etc.