Digital Printing
Arcalian supply a wide range of Yield Improvement technology for use in Digital Printing
Dust and static both cause considerable problems in large format digital printing, contributing to loss of revenue through spoiled prints.
It is essential that the substrate be clean and free of static before printing, to avoid "cobwebs", "hickeys" and other defects.
After the printing process, particularly with reel-to-reel printing, it is useful to eliminate static from the rewound reel, protecting the operators from unnecessary shocks.
Anti-Static |
||
 |
DisCord PlusEliminate: -
Review Read the review on the Image Reports website.
Testimonial I just wanted to write you a quick note to say THANK YOU! For the last 6 months we have not been able to run 80# Gloss Text Stock on our Canon 7000VP with severe static issues. We started outsourcing all our work to other vendors at a substantial loss. We attached the DisCord Plus to the output unit on the press and it immediately resolved any static issues. We can not believe how well this works. It is truly AMAZING!!! We have shown all the local technicians from Canon and have passed on your information to them. Please feel free to use this as a testimonial on your website or in any advertising that you may want to do. Also, anyone is free to contact me with any questions or for a referral on your product. Thanks again for all your help! Sincerely Bill Gillespie- click his name to email Bill! President / CEO Promo Printing Group |
 |
 |
ArcRodFor even longer-lasting static kill, use the semi-rigid ArcRod. Review Read the review on the Image Reports website. |
|
 |
Powered Anti-Static BarsArcalian supply a wide range of active (powered) anti-static bars for every application. We have traditional anti-static bars powered by a separate transformer (a transformer can control up to four bars), and "intelligent" bars that are self-contained, needing no external transformer. We also supply ATEX bars for explosion-proof areas. |
Jump to Knowledge Page |
Sheet Cleaning |
||
 |
Contamination Analysis RollersThe hand roller is smoothly applied to any flat surface, removing any loose, dry contamination. The roller is then cleaned on the Adhesive Pad which traps the contamination, leaving the roller clean for the next surface. Use High Tack rollers for thick, rigid substrates such as Corex™ and Foamex™ Use Medium and Low Tack for thinner polyesters and polycarbonate, or our special Thin Film polymer for delicate substrates <100? thick. Use a Silicone-Free roller and pad, where coating or laminating, to ensure adhesion. Don't forget to examine the pad to understand the sources of your contaminants. |
|
|
|
Adhesive RollsArcalian supply Adhesive Rolls from SDI – the largest manufacturer of Contact Cleaning systems and consumables in the USA. Our rolls are specially engineered to allow transfer of contamination in one direction only and can be manufactured in virtually any size to fit any Contact Cleaner, including those of our competitors. We supply both Continuous and Pre-Cut Adhesive Rolls. |
|
 |
Replacement Polymer Rollers for Contact Clean MachinesArcalian can upgrade Polymer Rollers in any Contact Cleaner, and can advise on the perfect formulation and surface characteristics for any substrate. With the right information, we can quote replacement rollers (either individually or in sets), either to replicate the originals, enhance cleaning abilities, or transform the Contact Cleaner to Silicone-Free operation. |
|
.JPG) |
IPA Wipes for Polymer Roller maintenanceHigh quality, lint-free IPA wipes for maintaining board cleaner polymer rollers in top condition. Sold in tubs of 200. |
|
Dust Control |
||
 |
Disposable and Permanent Dust Control FlooringArcalian has a wide range of flooring solutions for keeping dust-critical areas free of foot and wheel-borne contamination. |
Jump to Knowledge Page |
